PoE-48V Splitter

DANTEK PoE-48VS Splitters comply with IEEE 802.3af Power over Ethernet device that split the 48V DC over the Ethernet cable into 5/9/12V DC power output. The maximum distance between the Injector and Splitter is 100 meters.
With IEEE 802.3af Power over Ethernet devices being installed, the system administrator only has to use a single RJ-45 Ethernet cable to carries both power and data to each devices. Besides, to connect through Injector and Splitter, you could also have following benefit that, cost saving, easy for networking planning and higher reliability. Providing three kinds of DC output, the splitter offers 5V/2A, 9V/1.2A and 12V/1A DC for current model.

1. Features
·Comply with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX
· Providing three kinds of DC output, the splitter offers 5V/2A, 9V/1.2A and 12V/1A DC for current model.
·LED indicators power input indication
·Distance up to 100 meters
·Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation
·Work with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX
·EMI standards comply with FCC, CE class B
3. Technical Specification
Product IEEE 802.3af Power over Ethernet Splitter
Product  Description
POE  Splitter
2 RJ-45  Data / Data + Power out
Ethernet data rate
10/100M bps
Number of devices that can be powered
Ethernet data cable
TIA/EIA-568,Category 5/5e/ cable
POE Category 5 pin power usage
+ : pin 4,5     - : pin 7,8
Output voltage ,maximum current
DC12V /1A , DC9V /1.2A, DC5V /2A
LED indication
Dimensions (L*W*H)
75 x 58 x 21 mm
Operating environment
Humidity: 5~95%(non-condensing)
Temperature :0~50 degree C
Standard  Compliance
IEEE 802.3af   Power over Ethernet
IEEE 802.3u    Fast  Ethernet
IEEE 802.3     Ethernet
4. Applications
·The IEEE 802.3af Injector and Splitter installation
For a place hard to find the power inlet, IEEE 802.3af Injector and Splitter, as a pair, should provide the easiest way to power your Ethernet devices such as Internet Camera on the cell or Wireless Access Point that is installed on the top of the building.
DANTEK  TECHNOLOGY  LIMITED Unit 3B, Bei Zuo Qian Lian Building Gong Ye 7 Road Nanshan Area Shenzhen Guang Dong China Zip code. 518067
Tel: +86 755 26678603 Fax: +86 755 22678912 Copyright © 2015 Dantek. All Rights Reserved